Cookie Img
Back to top
   Call Me Free Offline Send SMS Send Inquiry
Home » Products » Microphone Cables » Microphone Cables

Microphone Cables



To Order, Select Product/s & Click on
Microphone Cables

Product Description

Microphones Cables

Capitalizing on our gigantic experience in this domain, we endeavor to mark our prominence by manufacturing, supplying and exporting some of the finest quality Microphones Cables. Available in different lengths, diameters and thicknesses; these cables are designed to connect with microphones and any musical instruments to check out bandwidth & sampling rate of noise. Featured with a balanced line XLR type connector, these cables are stringently checked on various quality parameters before final outing from our unit. Some of the significant features of our Microphones Cables are mentioned below:

  • Low signal attenuation
  • High bandwidth
  • Excellent compression resistance
  • Easy installation
  • Long lasting nature

Other details:

Microphones Cables
Chetan Microphone cable is used for connecting flow level microphones or musical instruments. Key properties of microphone cable (Mike) are ruggedness, flexibility, flex life and interference immunity. Mike cable construction utilizes either 1/2/3 or 4 conductor configuration. Cable selection depends on whether the mike or instrument is of a high or low impedance design. High impedance requires unbalanced single conductor cable while low impedance utilizes 2/3 or 4 designs. 4 conductor mike cable-Quad mike cables are connected by attaching 2 white conductors to 1 pin and 2 Red Conductors to the other pin in a balanced line XLR type connecter. Conductors joint in this manner lower the possibility of induced noise. Digital audio has been around for over 25 years, only recently has ben there an effort to standardize specifications. The audio engineering society (U.S) and the European broadcast union have established an international standard called AES / EBU. The detailed specifications of this standard are:

  • Sampling Rate: from 32 KHz to 192 Khz
  • Bandwidth: from 4.096 MHz to 24.5 Mhz
  • Impedance: 110 ohm ± 20 %
The key difference between twisted pair specification for digital audio cable and standard analog audio cable is the impedance specification.

Standard analog audio cable impedance is 45 ohm to 70 ohm. This potential amount of mismatch can result in signal reflection and jitter causing bit errors at the receiver. For this reason Chetan recommends 100 to 120 ohm shielded twisted pair cables.

Most of our Mike Cables are available ex-stock in a wide variety of colours and packages. Many of these are available off the shelf from our distributors. If you have a new or unusual requirement, you can contact us.

S.
No.
No. of
Core
No. of
Strands
SWG
Cond. Size in
mm
Overall
dia. in
mm
Cross
sec. area in
mm2
Max. Conductor
Resistance (ohm/km)
at 20oC
1
2
19/40 ABC
0.122
6.10
0.2220
77.66
2
2
19/40 ATC
0.122
6.10
0.2220
77.66
3
1
19/40
0.122
5.00
0.2220
77.66
4
2
14/36 ATC
0.193
6.10
0.4094
42.12
5
2
16/.2 ATC
0.203
6.80
0.5176
33.31
6
2
24/.2 ATC
0.203
7.40
0.7764
22.21
7
1
14/36 ATC
0.193
5.50
0.4094
42.12
8
1
40/40 ABC
0.122
5.50
0.4673
36.89
9
2
19/42 ABC
0.102
--
0.1552
111.11

Product Code : CC 03      Brand Name :CHETAN CABLETRONICS


CHETAN CABLETRONICS (P) LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

<< Back


CHETAN CABLETRONICS (P) LTD. All Rights Reserved.